Let us handle the production of jigs and tools from the concept design stage to assembly. Jigs are equipment for positioning and machining assistance during machining and assembly. There are many types of jigs such as machining jigs, assembly jigs, and inspection jigs.

Ideas are also required for jigs and tools. Please tell us about your current problems and ideas for improving the efficiency and standardization of your current work. Even if there is no drawing, we accept in one piece.

POINT
  • Processing jig, assembly jig, inspection jig in the factory
  • Jigs for conducting reproducible experiments at universities and research institutions
  • Please contact us even if there is no drawing.
  • Prototype production is also available in one piece. From parts processing to assembly.

Performance

Expansion plate for 3D coordinate measuring instrument

Expansion plate for 3D coordinate measuring instrument

Although the working range is 500 x 500, it is possible to measure a part of a large workpiece and to easily clamp a jig.

Design and manufacture wagons for internal use

Design and manufacture wagons for internal use

A commercially available aluminum frame is used, and the top plate uses an aluminum checker plate. It is a material that is difficult to scratch.
Size 1450x600x800

Assembly jig

Assembly jig

This is a positioning jig for accurately assembling several types of parts on an aluminum breadboard board. The contents of the work are taught by the customer, and the design and assembly adjustment are performed from the initial concept.
Size 100 × 120 × 30 (weight 0.5kg)


vice handle

vice handle

Left: Shuriken type that is easy to grasp and can be turned quickly with one hand Right: Magnet press-fit type handle that can be affixed to the machining center door when not in use The size of the genuine handle is large. Since it cannot be turned easily, a handle with a small turn is produced on-site. It is useful.


3D variable unit (jig)

3D variable unit that can be changed in 3D direction around a single point and fixed at any position, such as a tripod head used in cameras I was contracted. Newly designed upper plate, ball parts, and ball clamp parts due to dimensional structure that cannot be used for parts of off-the-shelf 3D units and camera platform.

By using a commercially available clamp lever with a variable tightening position, it can be fixed at any position without tools after position adjustment. Unit dimensions 200 × 125 × t70 (weight approx.2.5kg)


INDUSTRIES